Mikrotik RouterBoard RB2011UiAS-2HnD-IN 10 port 10/100/1000 with 2.4ghz radio

Mikrotik RouterBoard RB2011UiAS-2HnD-IN  10 port 10/100/1000 with 2.4ghz radio
Brand: MikroTik
Product Code: RB2011UiAS-2HnD-IN
Availability: In Stock
Price: ₦49,000
Ex Tax: ₦49,000
Qty:     - OR -   Add to Wish List
Add to Compare

Mikrotik RouterBoard RB2011UiAS-2HnD-IN  with 10 port 10/100/1000 and 2.4ghz radio

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, microUSB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply.

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), this means you can power another device just by connecting it over regular Ethernet cable

Product Specifications

 
Product code RB2011UiAS-2HnD-IN
Architecture MIPSBE
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 214mm x 86mm for PCB
License level 5
Operating System RouterOS
Size of RAM 128 MB
Storage size 128 MB
Storage type NAND
   
   

Powering Detail

 
Max Power consumption 11W
PoE in Passive PoE
PoE out Passive PoE
PoE in input Voltage 8-30 V
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 8-30 V

Wireless Details

 
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 4
Wireless 2.4 GHz chip model AR9344

Ethernet

 
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5

Fiber

 
SFP DDMI Yes
SFP ports 1

Peripherals

 
Number of USB ports 1
Serial port RJ45
USB Power Reset Yes
USB slot type microUSB type AB

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

Mikrotik RouterBoard RB2011UiAS-2HnD-IN  with 10 port 10/100/1000 and 2.4ghz radio

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, microUSB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply.

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), this means you can power another device just by connecting it over regular Ethernet cable

Product Specifications

 
Product code RB2011UiAS-2HnD-IN
Architecture MIPSBE
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 214mm x 86mm for PCB
License level 5
Operating System RouterOS
Size of RAM 128 MB
Storage size 128 MB
Storage type NAND
   
   

Powering Detail

 
Max Power consumption 11W
PoE in Passive PoE
PoE out Passive PoE
PoE in input Voltage 8-30 V
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 8-30 V

Wireless Details

 
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 4
Wireless 2.4 GHz chip model AR9344

Ethernet

 
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5

Fiber

 
SFP DDMI Yes
SFP ports 1

Peripherals

 
Number of USB ports 1
Serial port RJ45
USB Power Reset Yes
USB slot type microUSB type AB

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



All Rights Reserved. Ⓒ 2018 Presten Systems | Store Development by 360 Creations